Products

DESCRIPTION

Overview

Basic Info.

Model NO.	Customized
Fin Thickness	0.115mm
Fin Painting	E-Coating, Hydrophilic Fin
Applicable Industries	Garment Shops, Building Material Shops
Type	Heat Exchanger Coil
Tube Type	Smooth, Inner Thread
Product Name	HVAC Coil
Tube Material	Copper, Ss, Titanium
Fin Material	Aluminum
Transport Package	Wooden Package
Specification	15kg
Trademark	CST
Origin	Jiangsu
HS Code	8419500090
Production Capacity	5220 Piece/Pieces Per Month

Product Description

Changzhou Vrcooler Refrigeration Co.,Ltd is the professional design and manufacturer of various specifications of the condenser,evaporator, radiator, unit air cooler, heat exchanger production enterprises, with a strong refrigeration and thermal technology professional R &D Team.
Product Description

Get To Know The Evaporator

* The heat transfer efficiency is higher than that of the fin's disturbance to the fluid, which causes the boundary layer to break continuously, thus having a larger heat transfer coefficient; at the same time, because the baffles and fins are very thin and have high thermal conductivity, the tube-fin heat exchanger can be Achieve high efficiency.* Compact Because the tube-fin heat exchanger has an extended secondary surface, its surface area can reach 1000m³* The reason for the light weight is that it is compact and mostly made of aluminum alloy. Now steel, copper, composite materials, etc. have also been mass-produced.*Adapted to strong tube-fin heat exchangers can be applied to: heat exchange between gas-gas, gas-liquid, liquid-liquid, various fluids, and phase-change heat that undergoes concentration changes. It can adapt to different heat transfer conditions such as counter flow, cross flow, multi-stream flow, multi-pass flow, etc. through the unknown and combination of flow. The combination of series, parallel, and series-parallel between the units can meet the heat exchange needs of large-scale equipment. Industrially, it can be shaped and mass-produced to reduce costs, and interchangeability can be expanded through modular combination.*The manufacturing process requires strict and complex process. It is easy to block, not resistant to corrosion, and difficult to clean and repair, so it can only be used where the heat exchange medium is clean, non-corrosive, not easy to scale, not easy to deposit, and not easy to block.
Tube Fin Condenser and Evaporator Heat ExchangerTUBES• Copper, Stainless steel, Aluminium, Hot deep carbon steel, Titanium, Cupronickel • 7 mm, 5/16", 3/8", 12 mm, 1/2", 5/8", 20 mm, 25 mm• Smooth, Smooth thick-walled, Grooved, Super grooved (deeper grooves)• Connection to several circuits availableFINS• Aluminum• Copper• Stainless steel• Hot deep carbon steel• Titanium. Cupronickel
High quality raw materials(Main parts)

Name:Tube• Material:Stainlesss steel/Copper/Aluminum• Diameter:7 mm, 5/16", 3/8", 12 mm, 1/2", 5/8", 20mm, 25mm• Smooth, Smooth thick-walled, Grooved, Super grooved (deeper grooves)

Name: Fin• Material: Aluminum, Copper Stainless steel, Titanium Hot deep carbon steel, golded•Coating:E-coating> Al epoxy>hydrophilic• Thickness:0.1-2mm• Type:wave fin, flat fin , window fin

Name:Frame and casing
• Material: Galvanized steel, Aluminum, Stainless steel Copper, Brass•Thickness: 1-5 mm• End plates with or without collets• Various design of side plates

Our AdvantagesHow we design for you?
We promise we use the design software sold by a well-known European HAVC software company. Through 8 years of cooperation with them, we have designed, processed and exported coils and unit coolers to various countries all around the world.We will send you the 3D model drawing, data sheet together with the quotation list as you required.
Pre-Sales Service * Inquiry and consulting support.* Sample testing support.* View our Factory.After-Sales Service* 18 months warranty period* Free parts* Oneline shill supportFinished ProductsCompany Profile

VRCOOLERTECH Company

We specialize in designing, manufacturing and exporting refrigeration equipments for the varied industries since 2004.When it comes to building heat exchanger for any application VRCOOLERTECH Company has the capability to meet your requirements.If you need a heat exchanger using water, steam, refrigerant, glycol, ammonia, CO2 or any other medium, Vrcoolertech can build it for you. We build heat exchanger for replacement of existing heat exchanger or for new jobs, as well. We make standard copper tube / aluminum fin commercial heat exchanger and we build heavy industrial heat exchanger for process applications. You will be hard-pressed to come up with a job we can't handle.Certifications

Test Report & Certifications

Leak test report:Before package, we will do the pressure test in the pool to check if the product leak. (Process: Connect the inlet/outlet of the product to the tube s then put nitrogen in it, and put the product in water. If there is no bubbling, there is no leak.) Pressure Test Report:Under the pressure test, this product has no leakage; no visible abnormal deformation; no abnormal noise; the test conclusion is qualified. ISO 9001 Certifications

FAQ

Q1: What is your strength ?
A: Design and manufacture.Q2: How long is your delivery time?
A:Different products' production time is different. Generally, it needs 10 to 40 working days.Q3: What is your terms of payment ?
A:50% TT deposit in advance, 50% TT balance before delivery.We provide Alibaba Trade Assurance Service. Welcome for more advise.Q4: Any other products except evaporator coils ?
A: Yes.Our 3 main products are: Condenser and Evapotator, Industrial air cooler and Unit cooler and Coil.Q5. How to contact with you ?
A: 24hours online from TradeManager, quick answer, or email with us, wechat, skype, whatsapp is available.Select one product and leave message to us.